| |
| ¡ô |
Novel
materials: The cool storage adopts (glass reinforced fiber,
stainless steel and color steel plates) as panels, as well
as advanced compound materials as heat preservation materials
to make compound wall. With light weight, high strength, good
heat insulation (¦Ë¡Ü0.024Kcal/m,h,¡æ), anti-corrosive, aging-resistant
(glass reinforced fiber shall be aged after being immersed
in East Sea for 15 years), mothproof, non-poisonous and non-mould,
it can show its advantages fully especially under super low
temperature. Our cold storage filled a gap in field of cold
storage in the country. |
| ¡ô |
Saving energy
and preserving heat: As the cold storage has excellent features,
it has fast speed to lower temperature and long time to keep
temperature. Compared with other cold storages, it can save
energy 30 - 40%. |
| ¡ô |
Serial Configuration:
Walls of the cold storage are produced professionally. Being
formed in series they have strong interchangeability. With
various sizes, they can provide customers convenience to make
full use of existing fields and structural spaces. |
| ¡ô |
Easy Assembling
and Disassembling: All walls are connected with built-in buckles
inside so they are easy to assemble and disassemble. As assembling
time is short, the installation period is only 1/3 - 1/20
of that of cold storage with earth construction. For small
and medium-sized cold storage, normally it only takes 3 to
5 days for delivery. It is specially suitable for army forces,
mobile factories and mines as well as units in remote regions. |
| ¡ô |
Wide Adaptability:
The cold storage divides into three grades, namely L, D and
J with storage temperatures of 5¡«-5¡æ, -10¡æ¡«-18¡æ and -18¡æ¡«-23¡æ,
and temperature below -30¡æ is also available for special
need. They can meet different requirement to store meats,
aquatic products, poultry and eggs, milk products, fruits
and vegetables under low temperature test, and are widely
used in various departments in every industry and trade. |
Properties
and Data of Polyurethane Heat Insulation Core Materials:
| Item |
Density
Kg/m3 |
Thermal
Conductivity
W/m.k |
Compressive
Strength
N/cm2 |
Tensile
Strength
N/cm2 |
Bending
Strength
N/cm2 |
Moisture
Absorptivity
g/100cm2 |
| Value |
40¡«50 |
¡Ü0.029 |
¡Ý20.0 |
¡Ý24.5 |
¡Ý24.5 |
¡Ü3 |
1£®The density of heat insulation materials of floor in storage
is 55Kg/m3¡£
2£®Thermal conductivity means actual operation value which is
1.4 times of the measurement value.
Categories of Products:
-- classified as operation field: exterior interior
-- classified as refrigerating style: water cooled air cooled
-- classified as cool distribution style: cold air calandria
-- classified as structure of storage: single chamber multi-partition
|
| Attentions for Installation
and Operation: |
1. This product
should be installed inside the house. Should it be installed outside
the house, a simple shed should be built over the machine to prevent
sun and rain.
2. It is suggested to lay down skid under the house in the house
to protect the floor of cold storage. Our factory takes rubber blanket
as cushion.
3. The machine room of air-cooled set should be well ventilated.
Water-cooled set should be prevented from icing up and cracking.
4. When storing meats, the temperature of cold storage should be
-10¡æ¡«-15¡æ and the storing period should be 1 to 2 months. The
maximum daily loading goods should not be larger than 5% of the
volume of cold storage and goods should be spread inside the storage.
5. Cold storage should be managed by special person. Calandria should
be defrosted once every 6 to 7 days and the air cooler should be
defrosted once every 6 to 24 hours. |
| After-Sale
Service: |
1. There
are service and sales agencies responsible for packing and transportation
in all large cities in the country.
2. We have record cards for customers and re-visit system is carried
out to remove troubles and difficulties on time.
3. We can make installation and adjustment for customers and provide
technical guidance for installation.
4. We can provide complete set or spare parts with referential prices.
5. We provide guarantee period of one year for our product from
the date of delivery. Our factory shall be responsible for repairing
at customer's site if the machine is damaged due to quality reasons.
For those machines exceeds the guarantee period, we also provide
repair service at customer's expense.
6. We can provide training of maintenance people, and provide technical
consultation in fields of operation, maintenance and management
free of charge. |
| |
|
 |
